Legend Aadil
Members-
Posts
170 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by Legend Aadil
-
Try going upstairs if there is any? Sometimes I get confused, and if there's any stairs, go up them immediately. And I had the missing boss once, I think you have to do a quest, I haven't been again though...
-
Core 2 duo? Are you sure that's multi core? Or is it dual core? 2.0 Ghz Dual Core processor is recommended. 2.4 Ghz Multi Core processor is the bare minimum... So if your right, your processor is achieving the bare minimum. All the components have to be equal. It's no use if the RAM can handle high amounts of data but the processor can't. This can also lead to melting of components. So be careful!
-
Eh? Mines only 1GB, and I thought 2GB would be good enough, as it's the recommended requirement. I have a dual core, 2.8GHz so that should be fine, it's over the recommended requirement. My graphics card is in between minimum requirements and recommended requirement, so as long as I leave it on lowest detail possible, it should be fine! (As it is, the detail is still pretty decent on LOWEST possible)! Dual core to Quad core... the expense of changing processors is very expensive... And 2GB to 4GB! I haven't even got 2GB! How much were your 2GB sticks each? Where did you buy it from? Thanks
-
I think, my computer has probably some minimum requirements to play Sacred 2. I've reduced every graphic setting to low. I set the priority for Sacred 2 to high in the task manager programme. I make sure there is no other programme apart from the McAfee Antivirus open. Even then, it isn't open, just running as an icon in the task bar. The lag is really really horrendous. It lags out side of big cities slightly, and when you get into the cities where here are lots of NPC's, every step is a nightmare, takes around 10-15 seconds... How can I improve this? Here are some specs: Processor: Intel® Pentium® D CPU 2.80GHz (2 CPUs) Memory: 1022MB RAM Page File: 758MB used, 1700MB available Card name: NVIDIA GeForce 7300 LE Manufacturer: NVIDIA Chip type: GeForce 7300 LE DAC type: Integrated RAMDAC Device Key: Enum\PCI\VEN_10DE&DEV_01D1&SUBSYS_03461043&REV_A1 Display Memory: 256.0 MB Current Mode: 1024 x 768 (32 bit) (60Hz) Monitor: Plug and Play Monitor Monitor Max Res: 1600,1200 Driver Name: nv4_disp.dll Driver Version: 6.14.0012.6658 (English) DDI Version: 9 (or higher) Driver Attributes: Final Retail Driver Date/Size: 1/8/2011 04:27:00, 6397824 bytes Will disabling sound improve it? What can I do or improve without spending too much money if any at all?
-
To open the revokationwindow you have two options: 1. Uninstall the game 2. Open the commandline, enter the path to the *.exe File and type " /revoke" behind that, without the quote The line you entered could look like this: "C:\Games\Electronic Arts\Crysis\Crysis.exe /revoke". After this a window will open like shown in the picture below. Please click on "Start Manual Revokation". Where do I enter that line? Command Prompt? Yes, enter that into command prompt and it will popup with a window like the one shown on the page I linked to. It can't find the file. I think it's because I've de-installed it and re installed it too many times manually, and I also did it once from Add or Remove Programmes. Well, provided sacred 2 is still installed on your computer that should work. You dont put the quotes in when typing into command prompt if you have. However, seeing as you have installed Ice and Blood use this page (sorry for all the different links): https://support.securom.com/pop_sacred2.html Scroll down to the very bottom where it has a link to a tool which will revoke everything, Ice and Blood and Fallen Angel. Its called revoksib.zip. Run the program in that zip file and see if that works. The revocation cannot be performed, it's not found on the machine. When I re-installed the game, it doesn't ask for serial code. And before that I deleted nearly every file with 'Sacred' in it. *sigh* I appreciate what your doing, thanks so much. Any more would be appreciated, I'll also send a support request directly to them, any ideas who?
-
To open the revokationwindow you have two options: 1. Uninstall the game 2. Open the commandline, enter the path to the *.exe File and type " /revoke" behind that, without the quote The line you entered could look like this: "C:\Games\Electronic Arts\Crysis\Crysis.exe /revoke". After this a window will open like shown in the picture below. Please click on "Start Manual Revokation". Where do I enter that line? Command Prompt? Yes, enter that into command prompt and it will popup with a window like the one shown on the page I linked to. It can't find the file. I think it's because I've de-installed it and re installed it too many times manually, and I also did it once from Add or Remove Programmes.
-
To open the revokationwindow you have two options: 1. Uninstall the game 2. Open the commandline, enter the path to the *.exe File and type " /revoke" behind that, without the quote The line you entered could look like this: "C:\Games\Electronic Arts\Crysis\Crysis.exe /revoke". After this a window will open like shown in the picture below. Please click on "Start Manual Revokation". Where do I enter that line? Command Prompt?
-
I have 'Sacred 2 Gold' with all the patches and bugs etc. fixes already with it. Version 2.65.1 it says on read me. (I THINK THERES A NEW PATCH .2?) First time I installed it when I bought the game, it installed fine, and asked for activation code, and then done. My dad put the computer back to a date before Sacred 2 was installed, so the Sacred 2 was still there, but when you tried to open it, it says: " C:\Program Files\Deep Silver\Sacred 2 - Gold\system\sacred2.exe This application has failed to start because the application configuration is incorrect. Reinstalling the application may help. " So I reinstalled it , and it still said the same message... Then I de-installed it, then installed it, and it still said the same message! I finally de-installed it, removed every component, by using C-Cleaner, manually doing it myself... Then Installed it. It says it finishes install, but it never asks for activation code like it did first time. And when I try to run the game, it says the same message... " C:\Program Files\Deep Silver\Sacred 2 - Gold\system\sacred2.exe This application has failed to start because the application configuration is incorrect. Reinstalling the application may help. " Please help, anybody?