Popular Post Hooyaah 2,823 Posted May 14, 2020 Popular Post Share Posted May 14, 2020 This thread is intended to assist anyone who would appreciate a quick guide on how to patch Sacred 2 Gold in order to get their best possible gaming experience from this vast, visually rich, immersive, and enthralling RPG. There are convenient clickable links throughout this post which are highlighted in bright silver for your convenience. If you still find yourself looking for answers to any question or questions not covered in this post, you are welcome to ask them below for assistance. First, be certain that if the game has been previously installed on your PC. Uninstall the game and remove any leftover files. I must stress that this must be a "clean installation." Also, remove any previous save files as you will want to start a new character. Otherwise, their will doubtlessly be some bugged quests and certain other annoying glitches. Only ones chest files should be fine to retain and use. Second, I highly recommend installing Sacred 2 Gold and then launching the game once to the start screen where you will the the Seraphim (default player character) appear unless you still have a previous saved character that you did not delete. Do not select a character yet. If the game launched, then go no further but to exit the game and proceed to the next step. Third, download the Community Patch 160 here. Open the cm-patch0160 zip folder and click on cm-enable.exe and wait until you see the Ready to Patch screen display. This may take several moments (that may seem to last a lifetime). Now, click the Start button and it will automatically locate the Sacred 2 root folder and the installer will complete the latest patch. Wait until it completes the patch and then click Next and then Finish. This patch was very important for you to have installed. It fixes the game so that it should not crash, which is just one blessing among a host of other bug fixes and enhancements most surely to be to any player's delight. If you want the game to remain as close as possible to the "vanilla version," like an improved and patched version of Ice & Blood or Sacred 2 Gold, you should stop here. However, if you do not want the Community Items (jewelry, armor, and weapons) to drop in the game, then you will need to skip to the Fifth step, where you may add any desired Mods; here you will want to add the "Vanilla Drops" for CM Patch 160. If you choose to stop there, after the Vanilla Drops installation, the Community Items may be downloaded and used in the game but they will not drop as quest rewards or as loot. Fourth, you may be adding, at your own discretion, either the Sacred 2 Enhanced Edition or the Community Patch Addendum, the two are mutually exclusive. We will be enabling either by using the Generic Mod Enabler in this step to add either one or the other. Flix's quote: "Sacred 2 Enhanced Edition - about 50% fixes, 40% quality of life changes, 10% "just cause I felt like it" changes (art, etc.)." (If you want the Sacred 2 Enhanced Edition which fixes some issues that could not be fully agreed to by the Mod Team) you will want to add the Sacred 2 Enhanced Edition. (Or, you may instead wish to add The Community Patch Optional Addendum, which also addresses some issues in a manner that was not fully agreed to by the Mod Team. If you prefer the Community Patch Optional Addendum, please skip to the Fifth step, below.) If you do not wish to add either the Sacred 2 Enhanced Edition or the Community Patch Optional Addendum you may skip to the Sixth Step to add some new cool music or Seventh step and add any other desired Mods. Continuing with this, the Forth step, proceed to install the Generic Mod Enabler available here. Follow the directions for adding Mods in the seventh step below, skipping step five. Congratulations, unless you want to add more mods or the optional music file, you are done here and you may go directly to the game and have fun. Fifth, if you wish to add the Community Patch Addendum instead of the Sacred 2 Enhanced Edition, this step is for you. If you want to find out more about it please visit the topic in the link. To proceed to install the Sacred 2 Enhanced Edition, Follow the directions for adding Mods in the seventh step located below. Congratulations, unless you want to add more mods or optional music files, you are done here and may go directly to the eighth step. Sixth, this step if for you if you wish to add the cool new music file. You may wish (I strongly advise) to retain a separate copy of the musichq2 folder located in the pak folder located inside the Sacred 2 root folder, in case you find later that you prefer the original music and wish to change back. Now, to add the new background music file just drop 139_bg_highelves_day5.ogg into the zip folder, musichq2, which is located in the pak folder. Unless you wish to add any additional Mods you may skip to the Eighth step. Seventh, to add any Mods, you are best advised to download and employ the GME. For adding any Mods, like the Community Patch Optional Addendum, you are strongly advised to use the GME. However, for the the Elite Trimmed Textures, you may, unless you have a low-end rig, want to unzip the file directly into the pak folder because it's highly unlikely that you would prefer to return to lower quality image resolutions. You may download the GME here. To install any Mods follow the procedure to follow. Place and then extract the Generic Mod Enabler (GME) jsgme_2.6.0 zip file inside the Sacred 2 root folder and run it by extracting it in the Sacred 2 root folder and then run the GME once by clicking on jsme_setup.exe. Please, direct it to install to the Sacred 2 root folder. When it is has completed its task you may then close it and look inside the Sacred 2 root folder for the MODS folder the GME made. Now, place any of the mods zip folders inside the MODS folder For the GME to work, you must "Extract here" inside the MODS folder, each of them one by one. You should now see a separate folder for each mod by name. Open the GME again and any mod that you wish to activate click on it to select it and then activate it by using the > and the mods description will move to the activated section. The reverse process of clicking/highlighting the Mod and using the < will disable the Mod in question. Eighth, so that the graphics circle for collection of loot matches the actual area of acquisition you will want to open the options.txt file and chance the values on this following line as indicated: Options.txt needs only this line changed: autoCollectRadius = 230 Congratulations to you are in order. I sincerely hope that you have found this guide useful and that you enjoy Sacred 2 Gold as close as possible to the way you prefer to play it. 2 3 Link to comment
gogoblender 3,070 Posted May 14, 2020 Share Posted May 14, 2020 I just love the care and forethought you've put into your guide There's been years of work thats gone up on the boards for this game, and having a travel-guide through all the different ways to play this game is a brilliant way to take a step back and see it from all of the new journeyer's eyes who make their way to these boards Thanks Steve for all your effort. It must have taken a lot of your time time to cobble this together. The writing is engaging, and the links are are very helpful. Appreciation friend gogo Link to comment
Hooyaah 2,823 Posted May 15, 2020 Author Share Posted May 15, 2020 Thank you very much for your kind words, Rommel! After reinstalling the game again (because I missed it sorely) I found myself having to scramble to find all the files I needed and information that I wanted in order to make a decision about what Patches and Mods I wanted. I figured that if I, one who is very familiar with the Game and this site was feeling a bit burdened by the process, others, especially those new to Sacred 2 would likely find it a bit daunting as well. I want it to be simple for anyone to get the game up and running their way and quickly so they can just play Sacred 2 and have fun slaying Kobolds already! Link to comment
dw24 1 Posted June 28, 2020 Share Posted June 28, 2020 I get an error while trying to install this. I opened the game for a bit too and still get the same error: patch cannot delete target file X. I tried moving the file out of the folder but it kept saying it with all the files, ending up taking around 15 files out. When it was done, however, all the files it "installed" vanished. 1 Link to comment
Hooyaah 2,823 Posted June 28, 2020 Author Share Posted June 28, 2020 The patch will not install to effect if there are any preexisting game files or folders present from a previously installed version. It must be a "clean" installation. Could this be the issue? 1 Link to comment
gogoblender 3,070 Posted June 28, 2020 Share Posted June 28, 2020 13 hours ago, dw24 said: I get an error while trying to install this. I opened the game for a bit too and still get the same error: patch cannot delete target file X. I tried moving the file out of the folder but it kept saying it with all the files, ending up taking around 15 files out. When it was done, however, all the files it "installed" vanished. dw24 you've landed in just about one of the best places on the interweb to help you get going with your shiny new CMPatch. Happy you've found your way here over to us, I'm just here to welcome you to the forums! gogo Link to comment
Xmar 1 Posted August 7, 2021 Share Posted August 7, 2021 (edited) Hooyaah!! Clean install, New windows 10 crud is BLOCKING ANY patch or update file I try; I have the UK version, 2.40 & 2.45 which updated FINE on Win7..... Nor will my save files work. The old "incompatible" trick. I run as admin, no go. What gives? Thx, Marco* Edited August 7, 2021 by Xmar add jpg 1 Link to comment
Hooyaah 2,823 Posted August 7, 2021 Author Share Posted August 7, 2021 I would wager that your issue is because you are trying to run the game from a protected system file folder. I would recommend running it from an alternate drive, If you only have one drive create a new folder and name it Sacred 2 Gold. Try installing to that folder "C:\Sacred 2 Gold\" 1 Link to comment
gogoblender 3,070 Posted August 7, 2021 Share Posted August 7, 2021 6 hours ago, Xmar said: Hooyaah!! Clean install, New windows 10 crud is BLOCKING ANY patch or update file I try; I have the UK version, 2.40 & 2.45 which updated FINE on Win7..... Nor will my save files work. The old "incompatible" trick. I run as admin, no go. What gives? Thx, Marco* Mooooooooooooooorning Marco from sunny Montreal Quebec...just here to give our famous and hearty welcome to Darkmatters cheer out! and...complimentary Maple Syrup Happy you're loving the game, and and you've found our tiny community, looks like Hooyah's guide is ever helpful to you this community!! gogo Link to comment
Xylothia 3 Posted January 2, 2022 Share Posted January 2, 2022 (edited) I can't seem to download the GME from softpedia. Any obvious troubleshooting I might have missed/not thought of. I am in Denmark (EU) on an oldish PC (windows10, microsoft account logged in, McAfee LveSafe) with pretty good broadband internet. When I try to download the file from softpedia it displays this: Screenshot of the Download Window And when I click on the apparent download mirror.. absolutely nothing happens.. it doesn't seem to matter how long I wait. The download just doesn't become activate-able. Is this an issue anybody else has had? (Edit: Probably some sort of safety issue with my system. But I couldn't figure it out.. nevermind. I installed the files manually). Is it btw nescesary to have this tool? Can't I just make a backup of the files that will be changed and then copy/overwrite them from flix files directly?! (I want to enable the Enhanced Edition Mod) Edit: Yup, that seems to work just fine Edited January 2, 2022 by Xylothia Have additional question Link to comment
Androdion 884 Posted January 3, 2022 Share Posted January 3, 2022 Have you tried another mirror or site? There are quite a few available. It's easier to revert changes with GME, otherwise you'll risk missing a few files here and there and that can disrupt the stability of your instalation. Link to comment
Xylothia 3 Posted January 3, 2022 Share Posted January 3, 2022 (edited) Thanks for the reply. I guess you can change the mirror in the some option-type place at the site then. I just expected it to show me all available mirrors, and didn't think to look for the possibility to change it sowewhere else. Hope that can help someone then. Right now I actually like-/find it interesting -messing around with the files in the mod Edited January 3, 2022 by Xylothia Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now